News & Analysis
/
Article

Crystallographic defects strongly influence alloy’s magnetic properties

MAR 05, 2021
A prominent candidate that could replace rare earth magnets is found to have twinning defects that affect its coercivity and energy density product.
Crystallographic defects strongly influence alloy’s magnetic properties internal name

Crystallographic defects strongly influence alloy’s magnetic properties lead image

An alloy of manganese, aluminum and carbon, MnAl-C is a good candidate to replace scarce and expensive rare earth materials in permanent magnets. Gusenbauer et al. show that crystallographic defects in this alloy strongly affect its magnetization properties.

Nano-sized twinning defects are found to be particularly important in determining this alloy’s coercivity, the ability of a magnetic material to withstand the demagnetization effect of an external field.

The investigators prepared alloys with the chemical composition Mn53Al45C2 using a hot-extrusion technique. Transmission electron microscopy demonstrated that the resulting crystals transformed to regions with fine recrystallized grains and some non-recrystallized regions. The latter contained a large amount of crystallographic twins in a lamellar arrangement.

Twinning occurs when a single crystal has two or more regions with different orientations, which may be related by rotation about a symmetry axis. In this experiment, the lamellar regions were mostly found to be oriented 75.6o to one another, so were true crystallographic twins.

Experimental studies and simulations confirmed the existence of twin defects makes saturating the magnet more difficult. They also cause a reduction in coercivity as well as the permanent magnet’s strength, a quantity known as the energy density product.

“When twins cannot be avoided, numerical optimization suggests that small grains and thin lamellas will improve the energy density product,” said author Markus Gusenbauer.

For these reasons, the authors found MnAl-C can be a suitable magnetic material, especially if twinning defects can be suppressed.

“If they cannot be completely removed, it is advisable to try reducing the grain size and the twin width of the lamellar structures,” said Gusenbauer.

Source: “Insights into MnAl-C nano twin defects by micromagnetic characterization,” by Markus Gusenbauer, Alexander Kovacs, Harald Oezelt, Johann Fischbacher, Panpan Zhao, Thomas G. Woodcock, and Thomas Schrefl, Journal of Applied Physics (2021) The article can be accessed at https://doi.org/10.1063/5.0035387 .

Related Topics
More Science
/
Article
Employing transparent piezoelectric films can keep solar panels operating at peak efficiency in regions where water cleaning is impractical.
/
Article
The presence and geometry of balconies influences wind patterns and wind energy potential.
/
Article
Model with analytic gradients to help inform turbine layout optimization
AAS
/
Article
Now visible at dusk, don’t miss the opportunity to spot Comet ATLAS.